The boat is looking a lot more like it will float,
Between this and the last post on the boat there have been a few changes.
We removed a slither of plywood from each of the lower deck panels to take some of the stresses out of the plywood, and changed the shape slightly from the original plan.
As it was there was more chance of the boat cracking and causing more issues than becoming a successful build.
So things were changed after first replacing the cable ties with copper wire to see if that would help, we then had a beer, looked at the boat hard and decided altering it slightly was the better option than the box of matches.
The seems have been sealed and taped with epoxy, gluing the pieces together with epoxy tape and epoxy filler.
As the pieces are glued up the stitches are removed.
The plywood will then also pasted with epoxy to make it water tight. This is the next step.
Plans for this boat are from:
http://flo-mo.weebly.com/one-sheet-boats.html
No comments:
Post a Comment